English 中文 español العربية
русский française português ภาษาไทย
 
 
 
   PU Spray and Perfusion Equipment
BH-109 PU foam machine
 
 

BHPU foam machine
Technical Parameter:
Mainframe:
1 set
Spray gun:
1set
Pump:
2set
Pouring time:
99.9S
Temperature control:
≤25℃
Heating and preserved pipe:
5m
Power of pump:
740W,1400r/min
Air Pump:
0.6Mpa-0.8Mpa
Power Source:
380v, 50HZ,3PHASE
Usage:
1. This machine has one tank separated by left side and right side. The insulation material from two independent tanks flows into two sets of piston dosing pump.
2. Setting up the motor, two sets of piston dosing pump working, the black and white liquid mixed together under certain ratio.
3. And by the compressed air into the shower nozzle, with the mixed liquid changing into the atomizing material, then this material jet to the roof through the spray nozzle, thus completing spraying foam.
 
[Print this page]  [Close this page]
 
Sponsor:Yingkou Bohai Machinery Equipment Manufacture Co., Ltd
Web Design:Yingkou window   Technical support:Yingkou Aisida Computer Information Network Limited (ratified Jianzhan units)